Bolt-On vs. Weld-In C-Notch Kits: Which is Right for You?

Bolt-On vs. Weld-In C-Notch Kits: Which is Right for You?

When lowering your truck, you may encounter clearance issues between the rear axle and the frame. C-notch kits are designed to provide additional clearance, allowing for greater suspension travel and a lower stance.

Two main types of C-notch kits are available: bolt-on and weld-in. Each has its advantages and considerations. In this article, we'll explore the differences between bolt-on and weld-in C-notch kits to help you determine which option best suits your needs and installation preferences.

Understanding C-Notch Kits

C-notch kits are designed to modify the rear frame section of your truck, creating a "C" shaped notch that allows the axle to travel further up into the frame. This modification is crucial for lowered trucks, as it prevents the axle from hitting the frame under compression, which can cause damage and limit suspension travel.

C-notch kits come in various designs and materials, but they generally fall into two categories: bolt-on and weld-in. The choice between these two types depends on factors such as the desired strength, ease of installation, and personal preference.

Bolt-On C-Notch Kits

Bolt-on C-notch kits are a popular choice for those who want a relatively simple installation process. These kits typically include pre-fabricated steel plates that bolt onto the frame using existing holes or by drilling new ones. The main advantage of bolt-on kits is that they don't require welding, making them accessible to a wider range of enthusiasts.

However, it's important to note that bolt-on C-notch kits may not provide the same level of strength as weld-in kits. This can be a concern for those who plan to subject their truck to extreme loads or off-road use.

Weld-In C-Notch Kits

Weld-In C-Notch Kits

Weld-in C-notch kits offer a more permanent and secure solution for notching your truck's frame. These kits usually include steel plates that are designed to be welded directly onto the frame

The welding process creates a stronger bond between the notch kit and the frame, resulting in a more rigid and durable installation.

One of the main benefits of weld-in C-notch kits is their ability to restore the frame's strength to near-factory levels

However, weld-in kits require more skill and equipment to install. You'll need access to a welder and the knowledge to use it properly. If you're not confident in your welding abilities, it's best to have a professional or experienced fabricator handle the installation.

Factors to Consider

When deciding between a bolt-on and weld-in C-notch kit, consider the following factors:

  1. Intended use: If you plan to use your truck for heavy-duty or off-road applications, a weld-in kit may be the better choice for its superior strength.
  2. Installation skills: If you don't have welding experience or access to the necessary equipment, a bolt-on kit may be more practical.
  3. Frame condition: If your truck's frame is rusty or has been previously modified, a weld-in kit may not be feasible without additional preparation or repairs.
  4. Budget: Bolt-on kits are often less expensive than weld-in kits, as they require fewer materials and less labor to install.

Installation Tips

Regardless of which type of C-notch kit you choose, proper installation is crucial for safety and performance. Here are some tips to ensure a successful installation:

  1. Follow the manufacturer's instructions carefully, and don't hesitate to seek professional assistance if needed.
  2. Take accurate measurements and test-fit the kit before making any permanent modifications to your frame.
  3. Use high-quality hardware and welding materials to ensure a strong and durable installation.
  4. After installation, check for any signs of interference or binding in the suspension, and make adjustments as necessary.

Also see: Bolt On C Notch: Enhancing Vehicle Performance

Ready to Choose Between a Bolt-On and Weld-In C-Notch Kit

Choosing between a bolt-on and weld-in C-notch kit ultimately depends on your specific needs, skills, and preferences. Bolt-on kits offer a simpler installation process, while weld-in kits provide superior strength and durability.

By considering factors such as intended use, installation skills, frame condition, and budget, you can select the C-notch kit that best suits your truck and lowering goals.

Check out our selection at and get the best products on the market!

Join our social media communities on Facebook and Instagram for the best tips and deals in the industry!

Back to blog