Steering Extenders Installation: Tips and Tricks for a Perfect Fit

Steering Extenders Installation: Tips and Tricks for a Perfect Fit

When it comes to customizing your vehicle for improved comfort and driving experience, steering extenders installation tips are all you need to know!

These handy accessories allow you to adjust the position of your steering wheel, bringing it closer to you or extending it further away, depending on your preferences and physical requirements. However, installing steering extenders can be a bit tricky, especially if you're not familiar with the process.

In this article, we'll dive into the world of steering extenders and provide you with valuable tips and tricks for achieving a perfect fit during installation.

Preparing for Installation

Before you begin the installation process, it's crucial to gather all the necessary tools and materials. This will save you time and frustration during the installation and ensure that you have everything you need within reach. Some essential items to have on hand include:

  • Socket wrench set
  • Torque wrench
  • Allen wrenches
  • Screwdrivers
  • Pliers
  • Thread locker (e.g., Loctite)
  • Steering wheel puller (if required)

In addition to tools, make sure you have your steering extender kit, which should include the extender itself, mounting hardware, and any additional accessories or adapters specific to your vehicle make and model.

Familiarizing Yourself with the Instructions

Before you start the installation, take the time to thoroughly read through the manufacturer's instructions that come with your steering extender kit. Familiarize yourself with the steps involved, the order in which they should be performed, and any specific precautions or warnings mentioned.

If you have any doubts or questions, don't hesitate to reach out to the manufacturer's customer support or consult online forums dedicated to your vehicle make and model. Many enthusiasts have likely gone through the same installation process and can offer valuable insights and advice.

Removing the Steering Wheel

The first step in installing a steering extender is typically removing the existing steering wheel. This process can vary depending on your vehicle, so consult your owner's manual or the extender kit instructions for specific guidance. In general, however, the process involves the following steps:

  1. Disconnect the negative battery cable to prevent any electrical short circuits or airbag deployment.
  2. Locate and remove the steering wheel retaining nut or bolt, which is usually found at the center of the steering wheel.
  3. Use a steering wheel puller to carefully remove the steering wheel from the steering column.

When removing the steering wheel, be cautious not to damage any wiring or connectors associated with the horn, airbag, or other electrical components. Gently disconnect any necessary connectors and set the steering wheel aside.

Also see: ADD LINK

Marking the Steering Wheel Position

Before fully removing the steering wheel, it's a good idea to mark its current position in relation to the steering column. This will help you reinstall the steering wheel in the correct orientation later on.

Use a paint pen or marker to make a small line on both the steering wheel and the column, ensuring that they align when the wheel is reinstalled.

Marking the position is especially important if your vehicle has a complex steering wheel with multiple controls or if you have an aftermarket wheel that requires precise alignment for proper functionality.

Installing the Steering Extender

With the steering wheel removed, you can now focus on installing the steering extender. The exact steps may vary depending on the specific extender kit you have, but the general process involves the following:

  1. Place the steering extender onto the steering column, ensuring that it is properly aligned and seated.
  2. Secure the extender to the column using the provided mounting hardware, such as bolts or screws.
  3. Apply thread locker to the mounting hardware to prevent them from loosening over time due to vibrations.
  4. Torque the mounting hardware to the manufacturer's specified values using a torque wrench.

When installing the extender, pay close attention to the alignment and ensure that it is straight and level. Any misalignment can cause issues with steering feel, responsiveness, and even safety.

Checking for Proper Fitment

After installing the steering extender, take a moment to check for proper fitment. Make sure that the extender is securely attached to the steering column and that there is no excessive play or movement. Gently try to wiggle the extender to ensure that it is firmly in place.

If you notice any looseness or misalignment, double-check the mounting hardware and make any necessary adjustments before proceeding to the next step.

Reinstalling the Steering Wheel

Steering Wheel Installation

With the steering extender securely in place, it's time to reinstall the steering wheel. Follow these steps to ensure a proper and safe installation:

  1. Place the steering wheel onto the extender, aligning it with the marks you made earlier.
  2. Reconnect any electrical connectors or wiring associated with the steering wheel components.
  3. Secure the steering wheel to the extender using the provided hardware, such as the retaining nut or bolt.
  4. Torque the steering wheel hardware to the manufacturer's specified values using a torque wrench.

When reinstalling the steering wheel, be cautious not to pinch or damage any wires or connectors. Double-check that all connections are secure and properly seated before moving on.

Testing and Adjusting

After reinstalling the steering wheel, it's crucial to test the functionality and make any necessary adjustments. Follow these steps:

  1. Reconnect the negative battery cable.
  2. Start the vehicle and let the steering wheel self-center if equipped with an electronic power steering system.
  3. Turn the steering wheel lock-to-lock, ensuring that it moves smoothly and without any binding or resistance.
  4. Check that all steering wheel controls, such as the horn, cruise control, and audio buttons, are functioning properly.
  5. Take the vehicle for a test drive, paying attention to the steering feel, responsiveness, and centering.

If you notice any issues or abnormalities during the test drive, such as a misaligned steering wheel or unusual noises, return to the installation steps and double-check all connections and hardware.

Conclusion: Steering Extenders for a Personalized Driving Experience

In conclusion, installing a steering extender can greatly enhance your driving comfort and experience by allowing you to adjust the position of your steering wheel to suit your preferences and physical requirements. By following the tips and tricks outlined in this article, you can ensure a perfect fit and secure installation of your steering extender.

Remember to take your time, follow the manufacturer's instructions closely, and pay attention to proper alignment and torque specifications. With a well-installed steering extender, you'll enjoy a more personalized and comfortable driving experience for years to come.

We invite you to explore, where we delve deeper into the world of steering extenders and provide more advanced tips and tricks for installation and customization.

Back to blog