Troubleshooting the Most Common Issues with Streetscrapers

Troubleshooting the Most Common Issues with Streetscrapers

Streetscrapers, a type of custom vehicle modification, are designed to achieve an extremely low ride height for a unique and aggressive appearance. While these modifications can make a vehicle stand out, they can also introduce a variety of issues that need careful troubleshooting and maintenance.

This guide will explore the most common problems encountered with streetscrapers and provide practical solutions for addressing them.

Common Streetscraper Issues

Air Suspension Leaks

Identifying Air Suspension Leaks

Air suspension leaks are a frequent problem in streetscrapers. Symptoms include a noticeable drop in ride height, a continuously running compressor, and hissing sounds from the air lines or bags.

Troubleshooting Air Suspension Leaks

  1. Visual Inspection: Start by visually inspecting the air bags, lines, and fittings for any visible signs of damage or wear. Look for cracks, holes, or loose connections.
  2. Soapy Water Test: Apply a soapy water solution to suspected areas while the system is pressurized. Bubbles will form at the site of any leaks.
  3. Tighten Connections: Secure any loose fittings using the appropriate tools. Avoid over-tightening, which can damage the components.
  4. Replace Damaged Parts: If any air bags or lines are damaged, replace them promptly to restore the system’s integrity.

Compressor Issues

Identifying Compressor Issues

Problems with the air compressor can lead to inadequate air supply to the suspension system. Signs include the compressor not turning on, running continuously, or making unusual noises.

Troubleshooting Compressor Issues

  1. Check Electrical Connections: Ensure that all electrical connections to the compressor are secure and free from corrosion. Use a multimeter to check for continuity.
  2. Inspect the Relay and Fuse: A blown fuse or faulty relay can prevent the compressor from operating. Replace any defective components.
  3. Test the Pressure Switch: The pressure switch controls the compressor's operation based on the system’s pressure. Ensure it is functioning correctly and replace it if necessary.
  4. Check for Air Leaks: Leaks in the system can cause the compressor to overwork. Address any leaks as described above to reduce the load on the compressor.

Ride Height Inconsistency

Identifying Ride Height Inconsistency

Inconsistent ride height can result from improper calibration of the air suspension system or issues with the height sensors. This can lead to uneven tire wear and compromised handling.

Troubleshooting Ride Height Inconsistency

  1. Calibrate the System: Follow the manufacturer’s instructions to calibrate the air suspension system properly. This process ensures that each corner of the vehicle maintains the correct height.
  2. Inspect Height Sensors: Check the height sensors for any signs of damage or misalignment. Clean and realign them as necessary.
  3. Check for Leaks and Compressor Issues: Address any leaks or compressor problems that could be affecting the system's ability to maintain the correct pressure.

Handling and Stability Problems

Identifying Handling and Stability Problems

Handling and stability issues can arise from incorrect suspension settings, uneven ride height, or worn suspension components. Symptoms include poor cornering, excessive body roll, and a generally unstable ride.

Troubleshooting Handling and Stability Problems

  1. Adjust Suspension Settings: Ensure that the air suspension settings are appropriate for your driving conditions. Use the system’s controls to adjust the ride height and damping settings.
  2. Inspect Suspension Components: Check for worn or damaged suspension parts, such as bushings, control arms, and shocks. Replace any components that are not in good condition.
  3. Balance the Ride Height: Ensure that the ride height is consistent across all four corners of the vehicle. Calibrate the system if necessary.

Excessive Wear on Tires

Identifying Excessive Tire Wear

Excessive or uneven tire wear is often a result of improper alignment, incorrect ride height, or suspension issues. This can reduce the lifespan of your tires and affect vehicle performance.

Troubleshooting Excessive Tire Wear

  1. Check Alignment: Have the vehicle’s alignment checked by a professional. Adjust the alignment settings to match the manufacturer’s specifications.
  2. Inspect Suspension Settings: Ensure that the ride height is set correctly and consistently across all wheels. Adjust the air suspension system as needed.
  3. Rotate Tires: Regularly rotate your tires to promote even wear. Follow the vehicle manufacturer’s recommended rotation schedule.

Electrical Problems

Identifying Electrical Problems

Electrical issues in streetscrapers can affect the operation of the air suspension system and other vehicle functions. Symptoms include malfunctioning controls, intermittent operation, and blown fuses.

Troubleshooting Electrical Problems

  1. Inspect Wiring and Connections: Check all wiring and connections related to the air suspension system for signs of wear, corrosion, or damage. Secure any loose connections.
  2. Test the Control Module: Use a diagnostic tool to check the air suspension control module for any error codes or malfunctions. Replace the module if necessary.
  3. Check Fuses and Relays: Ensure that all fuses and relays are in good condition. Replace any that are blown or faulty.

Preventative Maintenance for Streetscrapers

Regular Inspections

Perform regular inspections of the air suspension system, electrical components, and suspension parts. Look for signs of wear, damage, and leaks. Early detection of issues can prevent more significant problems.

Proper Lubrication

Ensure that all moving parts of the suspension system are adequately lubricated. Use the appropriate lubricants for your vehicle to prevent wear and maintain smooth operation.

Tightening Connections

Regularly check and tighten all fittings and connections in the air suspension system. Loose connections can lead to air leaks and reduced performance.

Clean Air Supply

Maintain a clean air supply to the suspension system. Use air filters and dryers to remove moisture and contaminants from the air, preventing blockages and corrosion.

Scheduled Maintenance

Follow a scheduled maintenance routine as recommended by the manufacturer. This should include checking air pressure levels, inspecting seals and gaskets, and testing the operation of control valves and height sensors.

Conclusion: Ensuring Optimal Performance of Streetscrapers

Troubleshooting common issues with streetscrapers involves a systematic approach to identify and address problems early. By understanding the signs of air leaks, compressor issues, ride height inconsistencies, handling problems, tire wear, and electrical malfunctions, you can take the necessary steps to maintain your vehicle's performance and reliability.

Regular inspections, proper lubrication, and maintaining a clean air supply are key practices to ensure your streetscraper functions optimally.

Check out our selection at and get the best products on the market!

Join our social media communities on Facebook and Instagram for th

Back to blog