Are you looking to enhance your vehicle's performance and appearance? A lowering coil springs upgrade might just be the modification you need.

This article will explore what a lowering coil springs upgrade entails and why it's popular among automotive enthusiasts.

What Are Lowering Coil Springs?

What Is a Lowering Coil Springs Upgrade?

Lowering coil springs are aftermarket suspension components designed to replace the stock springs in a vehicle's suspension system.

Unlike factory springs, which are typically engineered for a balance of comfort and performance, lowering coil springs are optimized to reduce the vehicle's ride height. This modification results in a lowered stance, giving the vehicle a more aggressive look and often improving its handling characteristics.

Lowering coil springs achieve their purpose by compressing under the vehicle's weight, effectively lowering its center of gravity. This reduction in ride height can lead to improved cornering stability and reduced body roll during aggressive driving maneuvers.

A lowered stance can also enhance the vehicle's aerodynamics, potentially increasing fuel efficiency at higher speeds.

Benefits of a Lowering Coil Springs Upgrade

Installing lowering coil springs on your vehicle has several benefits. Firstly, the lowered stance provides a sleek and sporty appearance, enhancing the vehicle's overall aesthetics. This visual transformation can appeal to automotive enthusiasts looking to personalize their rides.

Furthermore, the improved handling characteristics can make driving more engaging and enjoyable. With reduced body roll and enhanced stability, the vehicle may feel more responsive and planted on the road, especially during spirited driving.

The lower center of gravity can also help minimize weight transfer during acceleration, braking, and cornering, further enhancing performance.

Vehicles with lowering coil springs may also experience improved traction, particularly during cornering maneuvers. This increase in grip can inspire confidence behind the wheel and allow drivers to push their vehicles to the limits with greater control.

Also see: What Is Lifted Coil Springs Customization?

Installing Lowering Coil Springs: A Proper Procedure

Installing lowering coil springs requires precision and attention to detail to ensure optimal performance and safety. Here's a step-by-step guide on how to properly install lowering coil springs on your vehicle:

1. Preparation:

Begin by gathering all the necessary tools and equipment for the installation, including a spring compressor, jack stands, and a torque wrench. Ensure the vehicle is parked on a level surface and safely secured with wheel chocks.

2. Lift and Support:

Using a hydraulic jack, lift the vehicle off the ground and support it securely with jack stands. It's essential to lift the vehicle evenly to prevent any imbalance.

3. Remove Wheels:

Remove the wheels using a lug wrench or impact gun and set them aside in a safe location. This step provides better access to the suspension components for the installation process.

4. Remove Old Springs:

Locate the old coil springs in the suspension assembly and carefully remove them using a spring compressor. Take note of the orientation and placement of any spring isolators or spacers for reinstallation later.

5. Install New Springs:

Carefully install the new lowering coil springs into the suspension assembly with the old springs removed. Follow any manufacturer-specific instructions to ensure proper alignment and orientation of the springs.

6. Reassemble Suspension:

Reassemble the suspension components in the reverse order of disassembly, including any spring isolators, spacers, or mounting hardware. Torque all bolts to the manufacturer's specifications using a torque wrench to ensure proper tightening.

7. Reinstall Wheels:

Once the suspension components are securely reassembled, reinstall the wheels onto the vehicle and torque the lug nuts to the recommended specifications. Double-check the tightness of all lug nuts before lowering the vehicle.

8. Lower Vehicle:

Carefully lower the vehicle back to the ground using the hydraulic jack, ensuring that it settles evenly on all four wheels. Remove the jack stands and lower the vehicle completely.

9. Test Drive:

Before driving the vehicle, perform a brief test drive to ensure everything is functioning correctly. Pay attention to any unusual noises or handling characteristics and address any issues promptly.

10. Alignment Check:

Finally, schedule a professional alignment check to ensure the vehicle's suspension geometry is properly adjusted. Proper alignment is crucial for maintaining tire wear and handling performance.

Lowering Coil Springs Upgrade: A Myriad of Benefits

In conclusion, a lowering coil springs upgrade offers a myriad of benefits for vehicle enthusiasts seeking to enhance both the performance and aesthetics of their rides.

From the visual transformation of a lowered stance to the improved handling characteristics and enhanced traction, this modification can take your driving experience to the next level.

Check out our selection at and get the best products on the market!

Join our social media communities on Facebook and Instagram for the best tips and deals in the industry!

Back to blog